GENERAL CARE GUIDE

Endura cabinetry is built to be UV and weather resistant. Crafted from high density

polyethylene (HDPE).

Endura is built to withstand rigorous daily outdoor and indoor use.

To keep Endura cabinetry looking good, follow these simple cleaning instructions.

• Clean regularly with a standard soap and water solution and a soft

cotton cloth.

• Acceptable cleaners: 10% chlorine bleach dilution, hand washing liquid

soap, glass cleaner, ammonia, furniture polish.

• If debris or grease appears on the surface, spray the affected area with a

garden hose. If necessary, remove excess dirt and debris by scrubbing

with a soft bristle brush or sponge.

• Allow the material to air dry or use a soft towel to remove excess moisture.

• A pressure washer with no greater than 1500 PSI may be used to remove

dirt, dust, or other types of airborne particulates. Use a wide angled

(40º >) spray nozzle and do not direct the sprayer less than 8” from the

cabinetry surface.

• Chemical cleaners, sprays, and hard scrubbers.

• Spic & Span which contains abrasives Sodium Carbonate and Sodium

Silicate.

• Tilex which contains Sodium Hypochlorite.

• Comet which contains abrasives Calcium Carbonate and Sodium

Carbonate.

Decorative surface hardware such as drawer and door pulls, and knobs

should be stainless steel, with stainless steel screws for best results. Refer to

the hardware manufacturer’s recommendations for the cleaning of stainless

steel hardware.

Hinges and optional soft-close glides require little to no maintenance. Should

dust or debris appear on the surface of a hinge or glide, remove using a soft

bristle brush or toothbrush.

Apply spray lubricant such as WD-40 to the hinge. Then open and close the

cabinet door a few times so the lubricant can work into the hinge while its

parts are in motion.

Storing open containers of caustic chemicals inside the cabinets

can be corrosive to the hinges.